Product Description

Auto CV Joint 49500-2E550 for HYUNDAI SHAFT ASSY-DRIVE,RH External Teeth : 27 Internal Teeth : 25 Seal Diameter : 62 mm ABS Teeth : 48

49500-2E550
 HYUNDAI  SHAFT ASSY-DRIVE,RH,495002E550

External Teeth : 27
Internal Teeth : 25
Seal Diameter : 62 mm
ABS Teeth : 48    

We have many more models for CV Joint,such as Toyota,Nissan,Honda,Mazda,Suzuki,ISUZU,FORD,BMW,VW,AUDI,PEUGEOT,CITROEN,Renault,etc.

If you have any inquiry or order ,kindly please contact us as below.

Thanks so much for your kind attention.We look forward to meet you soon !
 
 
 

###

###

###

###

###

###

###

###

How Long Does a CV Joint Last?

Having a constant velocity joint (CV joint) on your vehicle allows for power to be transmitted through the drive shaft at a constant rotational speed. Constant-velocity joints are used primarily in front-wheel drive vehicles.

Wear and tear

During a car’s lifetime, it’s likely that it will develop wear and tear on the CV joint. This is a component of the drive axle that enables smooth rotation and steering. If it is worn out, your vehicle may not turn as easily and you may experience excessive vibrations.
The first symptom of CV joint wear and tear is a clicking or clunking sound when turning the car. This is the result of the rubber boot that covers the joint being worn out. If this part is damaged, dirt and debris may be able to get inside the boot. If this happens, it can cause the joint to wear out and break.
Using the CV joint may not be enough to repair the problem. It can be a good idea to have your joint looked at by a mechanic. This is a cheaper alternative than replacing the entire joint assembly.
If your vehicle has over 100,000 miles on the odometer, you should have it checked out. If your CV joint is damaged, you may be forced to have it replaced. This will likely cost between $400 and 800.
A worn out CV joint may also cause your steering wheel to feel heavy and bounce. This could lead to a collision or even a serious accident. If you don’t take care of the problem, you could end up stranded.
The first step to repairing a CV joint is to remove the lower ball joint. During this process, you may have to do some reverse acceleration to test the joint.
A worn out CV joint may also leak grease around the tyres. This is a common symptom of CV joint wear and tear. This grease can become contaminated, making it less effective as a lubricant.
If your CV joint has a lock-nut, you may be able to fix it yourself. If you can’t, you may have to call a towing service.
If you think your CV joint has gone wrong, it is important to find a reputable repair shop. It is also important to shop around for estimates. This will help you decide on the best possible price for the repair.

Common causes of CV joint failure

Having a bad CV joint can make handling your vehicle more difficult and unsafe. If you suspect that your vehicle may be suffering from CV joint failure, there are several steps you can take to determine the condition of the joint.
Depending on the severity of the condition of your joint, you may need to have the joint replaced. Typical CV joint failure symptoms include a loud clunking sound when accelerating or decelerating, a grinding noise while turning, and a snapping sound.
You should also check for grease leaks, which are a sign of a damaged joint. Grease leaks can accelerate the wear and tear of a joint. Grease is important for lubricating the joint, and leaking it will allow debris to enter the joint.
Another common cause of CV joint failure is rust. Rust normally comes from moisture. Rust can affect the joint’s ability to absorb friction. Rust can also create cracks in the joint’s rubber boots. If you see a crack, you should replace your CV joint immediately.
Another common symptom of a bad CV joint is the sound of a knocking noise. This can come from the inner or outer joint of a rear-wheel drive vehicle. If you notice a knocking noise, try accelerating slowly in a circle to determine if it is caused by a bad joint.
If you hear a knocking noise that seems to get louder and louder with each passing mile, you may have a bad CV joint. If the noise is coming from the front wheels, you should check the wheel lug nuts for looseness.
If you are not a car mechanic, you may need to seek professional help. Typically, professionals will replace the entire axle assembly, including the CV joint, when it is damaged.
CV joint wear can cause problems with vibrations, which can make driving dangerous. This joint is critical to the vehicle’s suspension system. In addition to allowing for wheel control, constant velocity joints help to transfer power from the transmission system to the wheels.
If you suspect that your CV joint may be faulty, make sure you have a mechanic inspect your car before you decide to repair it yourself.

Symptoms of a bad CV joint

Symptoms of a bad CV joint can be extremely dangerous if left unnoticed, so be sure to check on yours regularly. Failing CV joints can cause a range of problems from excessive vibration to loss of control. Before attempting any repairs, make sure you follow your manufacturer’s specifications.
One of the most common symptoms of a bad CV joint is the clunking sound that occurs when turning. This is due to the fact that the joint is unable to balance properly during rotation. The sound is usually noticeable when accelerating or turning in a circle.
The best way to check for a clunking sound is to crank the steering wheel to one side. If it makes a clicking noise, it’s likely that the CV joint is in need of repair.
Another symptom of a bad CV joint is the presence of grease on the tires. This grease can be a sign that the joint is leaking grease and dirt.
Another symptom of a bad joint is a clunking noise when you change gears on the vehicle. This symptom can also be caused by a broken CV joint boot. This can result in debris getting into the joint and causing significant wear.
A CV joint is a vital component in any vehicle. These joints transfer power from the transmission to the wheels. They are also a vital part of vehicle suspension systems. The joint’s ability to perform well is based on a number of factors. If the joint fails, it could cause transmission slippage, and it could also prevent the wheels from rotating properly.
Other symptoms of a bad CV joint include shuddering in the axles, excessive vibration, and loss of alignment. If these symptoms occur, the joint should be repaired immediately. If the problem persists, it may be time to replace the whole shaft assembly.
The most important symptom of a bad CV joint is the click, clack, and shudder that occur when turning. If this happens, make sure the CV joint is not leaking transmission fluid. A low transmission fluid level can also cause overheating and shifting problems.

How long can you drive with a damaged CV joint?

Depending on your car’s model, CV joints usually last between 70,000 and 120,000 miles. The lifespan of CV joints depends on how frequently you drive, how harsh the driving conditions are, and how often you perform maintenance.
A damaged CV joint can cause you to experience excessive vibrations and can affect your transmission. When this happens, you will have a hard time maintaining a straight course on the road. Taking your vehicle to a mechanic will help you get the repair you need.
If you notice a clicking noise when turning, you may have a damaged CV joint. This sound can be louder on the left side of the vehicle than the right side. You may also hear a loud tapping sound. The clicking will become more pronounced as the part wears out.
The CV joint is an intricate system that helps connect axles to the front wheels of your vehicle. It works by transferring torque from the transmission to the drive wheels. If the joint is worn out, the axle can slip or break. You may hear grinding or popping noises when you turn or accelerate.
A worn CV joint will also cause clunking noises when shifting or turning. If you hear these sounds, it is best to take your car to a mechanic as soon as possible.
It is important to know how to test your CV joint. This will help you determine whether the joint needs to be replaced or repaired. Having your CV joint repaired will help you avoid expensive repairs and prevent further damage.
To test your CV joint, you can drive in a slow circle in an empty parking lot. When you turn left, you will hear a clicking sound. If you turn right, you will hear a knocking sound.
A worn CV joint can also cause your car to shake or be bouncy. You will also hear grinding noises when you brake at low speeds. If these noises are accompanied by a popping or rapping noise when you hit a bump, it is likely that the joint is worn out.

editor by czh 2022-12-07